1. Remove them from your wrist.

Before you clean your mala beads and before you put them back on, remove them from your wrist. If you are wearing a necklace or bracelet, you may need to remove that first.

2. Wash your hands with soap and water to remove any oils or lotions that could transfer onto the beads.

After you have removed any oils or lotions that could transfer onto the beads, wash your hands with soap and water to remove any remaining residue. You should rub your hands together for at least 20 seconds, as this is the amount of time it takes to effectively remove all dirt and germs from them.

If you want to be extra cautious when it comes to washing your mala beads, consider using a mild dishwashing liquid on a clean cloth rather than using hand soap directly on them. This will help prevent the soap from transferring onto your mala beads and damaging their finish.

3. Place the beads in a bowl or cup of warm water, add 2-3 drops of gentle dish soap and allow them to soak for 10 minutes to remove dirt and oils.

• Place the beads in a bowl or cup of warm water, add 2-3 drops of gentle dish soap and allow them to soak for 10 minutes to remove dirt and oils. Do not use hot water as this may damage your beads!
• After soaking, rinse your mala under warm running water until all traces of soap are gone (this will take several minutes). Then wring out excess moisture by gently squeezing each bead between two fingers; if you’re using a soft material like jade, alabaster or agate without much detail on the surface—you can use a towel instead.
• Allow your mala to dry naturally before storing it away from direct sunlight or heat sources (like radiators) where it could get damaged by excessive exposure over time

4. Remove your beads from the water, place them on a clean towel, and gently pat dry with another clean towel.

• Remove your beads from the water, place them on a clean towel, and gently pat dry with another clean towel.
• Don’t put your mala beads in direct sunlight or in the washing machine! This can cause damage to the wood grains which may result in an uneven finish after you finish cleaning them.
• If you’re curious about how long it takes for your malas to air dry, here are some common variables for calculating drying time:
• The amount of water absorbed by each bead (how much water did they hold?)
• The size of each bead (how much surface area does each one have?)
• In general, most people will find that their malas are fully dry within 24 hours if left out uncovered; however, keep in mind that every pair has different properties so there’s no exact way of knowing exactly how long it’ll take. The best way to determine whether or not something is dry is simply by feeling with your hands; if something feels damp then continue drying it until it feels completely dry!

5. Lay out your mala flat on a clean, dry towel until they are completely dry before wearing again. Important note: Some types of stones need to be kept away from direct sunlight while drying, as this can damage the stone (this is especially true for opals). Be sure to do your research based on the type of gemstones you have included in your mala to ensure they are dried correctly and safely!

Once your beads are dry, it’s important to make sure they are clean and safe to wear. This can be done by washing them in water with mild soap and then laying them out on a towel until they are completely dry before wearing again. Some types of stones need to be kept away from direct sunlight while drying, as this can damage the stone (this is especially true for opals). Be sure to do your research based on the type of gemstones you have included in your mala to ensure they are dried correctly and safely!

The way you wash your mala affects whether it will be able to last and remain safe for use in the future

The way you wash your mala affects whether it will be able to last and remain safe for use in the future. Follow these steps to make sure your beads stay clean and sanitary:

• Choose a natural soap like Dr. Bronner’s Pure-Castile Liquid Soap, which is made with organic oils, not sulfates or parabens.
• You can use any kind of bowl that has a wide enough opening at the top so you can fit the mala inside of it. A plastic or glass bowl is preferable because metal could rust over time (although this may not matter if you only have one or two malas).
• Fill up half of the bowl with lukewarm water (about 100 degrees Fahrenheit), add 2-3 drops of gentle dish soap and stir until it dissolves completely (this depends on what kind of soap you’re using).
• Immerse your mala in this mixture for about 10 minutes (or longer if needed).